BMW E36, E46, E39, E34, E60, E38, E65, E66, E67, E83, E53 and E85 with Engine M50/ M52/ M54 (6 Cylinders) - Water Pump (HUBER)

BMW E36, E46, E39, E34, E60, E38, E65, E66, E67, E83, E53 and E85 with Engine M50/ M52/ M54 (6 Cylinders) - Water Pump (HUBER)

Category: Water Pump

Description
Inquiry

Specifications

Brand: Huber

Supplier: Soon Heng Motor Supply Co.

E-mail: sales@soonhengmotor.com.my

OE Information: 11517527910, 11517527799, 11511433828, 11511437648, 11511722536, 11511730414, 11511740241, 11511744243, 11517503884, 11517504040, 11517509985, 11511433712

Part can be used for BMW 3 Series E36/ E46, 5 Series E34/ E39/ E60, 7 Series E38/ E65/ E66/ E67, X3 Series E83, X5 Series E53, Z3 Series E36 and Z4 Series E85 with Engine M50/ M52/ M54 (6 Cylinders).
No additional sealant should be applied during installation. Otherwise, it will forms a bead on the inner section of the casting, this is removed with coolant flow and becomes wrapped around the rotating pump shaft between the housing and the impeller. Eventually will causes the component failure.
An improper or excessive use of sealant often leads to premature leakage. Thus, for example, excess sealant which has penetrated into the cooling area portion detached and deposited in the mechanical seal. On the other hand, it may come at the assembly area (engine) to a leakage due to an uneven applied sealant compound.
Never start the engine without coolant! The dry running destroy the mechanical seal.
Kindly drop us a message by providing your vehicle chassis number to avoid incompatible part.